SOLAQ UV CURING PRODUCTS

A REVOLUTION IN CAR REFINISHING

Solaq UV Lacquer, Solaq UV Fade Out Lacquer, Solaq UV Primer/Filler and Solaq UV Alloy Lacquer are cured using UVA (ultra violet) technology, i.e. an Ultra Violet Lamp.

The Solaq UV Lacquer can be used over water based and solvent based paints and is cured in approximately 2-3 minutes. Once cured it can immediately be polished by hand or machine. The cured clear coat is resistant to solvents such as wheel acids and can be power washed or passed through a car wash immediately after drying.

If for any reason Solaq has to be recoated with base coat, (i.e. due to a colour match problem) this also can be done immediately.

THE AYCE SYSTEMS ALLOY WHEEL CURING OVEN WILL FULLY CURE SOLAQ LACQUER IN AS LITTLE AS 2 MINUTES. DOWNLOAD PDF FOR MORE INFORMATION

Solaq UV Alloy Lacquer is a UV curing product specifically for Alloy Wheels, this product has special adhesion qualities which allows you to apply it directly onto polished Alloy Wheels.

• Fully Cured in 2 – 3 minutes using UV Lamp
• VOC Compliant
• ISO Certified
• The only UV product that is compliant to new legislation
• Non Isocyanate
• Only 1 coat required to achieve bodyshop finish
• Can be used outside of a booth (Ready for use, non isocyanate)
• Easy to apply
• No mixing required
• Bodyshop high gloss finish
• Immediately overcoatable after curing
• Unlimited pot life (out of sunlight) so no wastage
• Dust & minor imperfections can be polished out immediately after curing
• Dries easily in damp or cold conditions
• Solaq UV Lacquer application time is a lot shorter than conventional two pack lacquer
• Usage is less than conventional lacquers so cost savings
• Small jobs need no longer tie up booth time so additional cost savings